[1] E. Blânzeanu, M. Marin, M.N. Verziu, A. Dumitru, B.V. Vasile, C. Stavarache, D.E. Cozorici, R. Luque, C. Zaharia, I.C. Radu: "Chitosan-polylactic acid composites: from seafood waste to advanced functional materials for 3D printing", Adv. Compos. Hybrid Mater., 2025, 8, 66. Link
[2] I. Lascu, C.C. Gheorghiu, I.C. Bucur, A.M. Tănase, A. Dumitru: "Influence of polypyrrole-derived nitrogen-doped carbon nanostructure morphology on the microbial composition of anodic biofilms and microbial fuel cell performance", Surf. Interfaces, 2025, 56, 105586. Link
[3] C.E. Stavarache, A. Khosravi, M.M. Marin, J. Pandele-Cusu, S.E. Lazăr, F. Papa, V. Fruth, D. Culiță, N.I. Cristea, F. Karakoulia, K. Triantafyllidis, M.N. Verziu: "Catalytic synthesis of lactic acid from cellulose over easily-prepared niobium-doped titania by solution combustion synthesis", Biomass Bioenergy, 2025, 194, 107687. Link
[4] A. Dumitru: "Electroctalytic activity towards ORR correlated with synthesis method and nitrogen functionality of polyaniline derived nitrogen doped carbon materials", Rom. J. Phys., 2025, (in press). Link
[5] D.E. Cozorici, E. Blânzeanu, I.C. Radu, M.N. Verziu, C. Stavarache, M. Marin, R. Luque, C. Zaharia: "Innovative Zein-derived inks: Towards sustainable 3D printing solutions", Results Eng., 2025, 25, 104017. Link
[6] I.C. Radu, A.M. Vadureanu, D.E. Cozorici, E. Blanzeanu, C. Zaharia: "Advancing Sustainability in Modern Polymer Processing: Strategies for Waste Resource Recovery and Circular Economy Integration", Polymers, 2025, 17, 522. Link
[7] D. Baltag, A. Raducan, F. Bilea, V. A. Neacșu, C. Bradu, P. Oancea: "Oxidative removal of Orange G by homogeneous advanced oxidation processes", J. Water Process Eng., 2025, 73, 107670. Link
[1] M.M. Marin, A. Dumitru, R. Luque, I. Radu, M.N. Verziu: "A new approach to 3D-printed Ni based catalysts for the conversion of α-cellulose to lactic acid" (poster), 9th EuChemS Chemistry Congress (ECC9), Dublin (Ireland), 7-11 July 2024.
[2] E. Blânzeanu, D. Cozorici, I.C. Radu, C. Stavarache, C. Zaharia, G.M. Vlăsceanu, E. Vasile, R. Luque: "Innovative 3D printed catalytic supports using SLA: incorporating metal and chitosanligands for superior catalysis" (oral presentation), 23rd Romanian International Conference on Chemistry and Chemical Engineering (RICCCE), Constanța (Romania), 4-7 September 2024.
[3] I.C. Radu, D. Cozorici, E. Blânzeanu, C. Stavarache, C. Zaharia, R. Luque: "3D Printed catalyst supports based on metal loaded renewable polymers" (oral presentation), 23rd Romanian International Conference on Chemistry and Chemical Engineering (RICCCE), Constanța (Romania), 4-7 September 2024.
[4] R. Luque: "Benign-by-design methodologies for a more sustainable future: present and future" (plenary lecture), 23rd Romanian International Conference on Chemistry and Chemical Engineering (RICCCE), Constanța (Romania), 4-7 September 2024.
[5] C. Zaharia, I.C. Radu, D. Cozorici, R.C. Popescu, R. Luque: "Advances in 3D-Printed Poly(vinyl alcohol) Vascular Grafts: Design, Fabrication, and Medical Implication" (oral presentation), 23rd Romanian International Conference on Chemistry and Chemical Engineering (RICCCE), Constanța (Romania), 4-7 September 2024.
[6] M.M. Marin, R. Luque, I.C. Gifu, E. Alexandrescu, S. Preda, A. Serafim, H. Iovu, R. Ianchis, I. Stancu, A.A. Dumitru, M.N. Verziu: "Novel advanced 3D printed materials" (poster), 23rd Romanian International Conference on Chemistry and Chemical Engineering (RICCCE), Constanța (Romania), 4-7 September 2024.
[7] M.N. Verziu, I.C. Radu, D. Cozorici, E. Blânzeanu, M. Marin, A. Dumitru, C. Zaharia, R. Luque: "From seafood waste to Cu based materials by 3D printing" (poster), 23rd Romanian International Conference on Chemistry and Chemical Engineering (RICCCE), Constanța (Romania), 4-7 September 2024.
[8] V.A. Neacșu, M.N. Verziu, I. Radu, D. Cozorici, E. Blanzeanu, C. Zaharia, R. Luque: "3D-printed Ni-catalysts for bioconversion of cellulose" (poster), European Materials Research Society (E-MRS) Spring Meeting 2025, Strasbourg (France), 26-31 May 2025.
[9] R. Luque: "Shaping the Future of Global Leaders: Insights and Directions in Bioengineering and Polymer Science" (plenary), 4th International conference on Bioengineering and Polymer Science 2025 , Brașov (Romania), 2-5 June 2025.
[10] C. Zaharia, E. Blanzeanu, D.-E. Cozorici, I.-C. Radu, Marian N. Verziu, M. Marin, H. Iovu, R. Luque: "Circular Solutions for Additive Manufacturing: Bio-Based Composites with Catalytic Potential" (keynote), 4th International conference on Bioengineering and Polymer Science 2025 , Brașov (Romania), 2-5 June 2025.
[11] C. Radu, C. Zaharia, E. Blanzeanu, C. Stavarache, D. Cozorici, R. Luque: "Sustainable 3D printed catalyst for PLA depolymerization" (oral), 4th International conference on Bioengineering and Polymer Science 2025 , Brașov (Romania), 2-5 June 2025.
[12] M.M. Marin, R. Luque Alvarez de Sotomayor, I. C. Gifu, M. Albu Kaya, E. Alexandrescu, S. Preda, A. Serafim, H. Iovu, R. Ianchis, A. Dumitru, M. N. Verziu: "Innovative 3D Printed biomaterials" (poster), 4th International conference on Bioengineering and Polymer Science 2025 , Brașov (Romania), 2-5 June 2025.
[13] E. Blânzeanu, D.-E. Cozorici, I.-C. Radu, M.N. Verziu, H. Iovu, R. Luque, C. Zaharia: "Additive Manufacturing of Metal-Loaded Structures for Applications in Catalysis" (poster), 4th International conference on Bioengineering and Polymer Science 2025 , Brașov (Romania), 2-5 June 2025.
[14] D.-E. Cozorici, E. Blanzeanu, I.-C. Radu, M.N. Verziu, C. Stavarache, M. Marin, R. Luque, H. Iovu, C. Zaharia: "UV-Stabilized Zein Inks for Biopolymer-Based 3D Printable Structures" (poster), 4th International conference on Bioengineering and Polymer Science 2025 , Brașov (Romania), 2-5 June 2025.
[15] M. Verziu, S. Murugesan, I. Radu, E. Blanzeanu, D. Cozorici, B. Vasile, D. Culita, V. Tofan, A. Richel, R.Luque: "Catalytic conversion of lignin into monomers and dimers units over Ni-activated carbon catalyst" (poster), ISGC, the world event in sustainable chemistry research & innovation 2025, La Rochelle (France), 12-16 May 2025.